Analysis and designing of building using Etabs and architecutural designing by 3dsmax and twimotion
DOI:
https://doi.org/10.37628/.v4i2.834Abstract
AutoCad is the most widely used tool used by engineers all around the world to design drawing products. It is the most used software for making plans and layouts of any type of structure in civil engineering department. ETABS stands for Extended Three-Dimensional Analysis of Building Systems. Etabs is used to design any type of multistoried structure in a very systematic process. Etabs is used to Analysis a structure and give a brief report of all structural members. 3ds max is a software developed by Autodesk. It is mostly used to create photorealistic visualisation of any structure, interior of a building, etc. Twinmotion is a real time rendering software. We can create a image or a video and even a VR experience by using this software. Our project is an attempt to Analyze and design a G+4 commercial corporate building of 4,556 sq.ft buildup area as per INDIAN CODES-IS 1893-part2,IS 456:2000 guidelines and create a 3D visualisation by using 3DS max and Twinmotion software.References
Ragy Jose1, Restina Mathew, Sandra Devan,
SankeerthanaVenu, Mohith Y S “Analysis and Design of
Commercial Building Using Etabs”
Puneet Mittal, Nishant Kad “Analysis and design of a
structure is a very time consuming and difficult job if its
done manually. Instead of manual method this task of
anaylze and design can be done by using the softwares which
are actually made for it, software such as Etabs and Staadpro
.And a comparative study was made between this two
softwares
Mahesh N. Patil, Yogesh N. Sonawane “Seismic Analysis
of Multi-storeyed Building”
S.Vijaya Bhaskar Reddy, YugandharSagar.A, Srinivas
vasam, Srinivasan Rao “Effect of wind load on multistoried
building”
M B Vikram and Roopesh M “ A comparison was made
and Analysis was done of a multi Storied building in various
sesmic zones.
Balaji.U and Selvarasan M.E (2016): This paper deals with
analysis and design of a multistoried building under both
static and dynamic load by using Etabs software worked on
analysis and design of multistoried building under static and
dynamic loading conditions using ETABS
Geethu et.al (2016): Performed a analysis and design of a
multi-storeyed building under static and dynamic loading by
using both Staadpro and Etabs software to see the difference
and efficiency of both the software and the conclusion was
that Etabs shows higher values of bending moment and axial
force as compared to Staadpro
