Estimation of Sand for Foundry and Reclaimed towards Civil Construction

Authors

  • Bangshidhar Goswami Assistant Professor, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Debabrata Das Assistant Professor, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Basuki Nath Choudhary Assistant Professor, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Pankaj Kumar Student, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Abhavya Prachi Student, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Zeeshan Ansari Student, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Sanat Mondal Student, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Trisha Chanda Student, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Snigdha Dutta Student, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Sourav Rajak Student, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Raju Kuiry Student, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Ranjan Mandal Student, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Mominoor Alam Student, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Ranjit Sah Student, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur
  • Vikram Sharma Student, Department of Metallurgical Engineering, RVS College of Engineering and Technology, Jamshedpur

DOI:

https://doi.org/10.37628/jepd.v5i2.528

Abstract

Experimental steps are linking sand extracts suitable for foundry purposes. Foundry sand is either geologically procured or reclaimed from past processing steps. Clay remaining in past reclaimed portions seemed to be high enough if articulated as well account as geologically procured portion of bulk. Same in accord objection persist for geologically resourced sand containing more clay by proportion. Balance of same clay or otherwise vary properties of mould and preferentially cores. Core achieving is possible from conditional towards collapsible factualism forms, where application of polymeric binder has been applicable. Firing of same in as cast conditional has formed irrecusably forms of composition considered under pollution abetments. Hence forth spray dust in provision alarming unusable under similar sector or only waste to guide issued towards civil concrete issues. Polluted to at all in other link have transposed reclaim opt to claim opt for civil sector since a well calibrated fired provisioned material. Polymer originated foundry sand seemed to get rescued from fronts of same in concreting aside philosophies at a better in prosecution alarms.

References

PR Beeley. Foundry Technology. Burlington: Elsevier; 2001.

OP Khanna, M Lal. A Textbook of Foundry Technology, New Delhi: Dhanpat Rai Publications (P); 1999.

GS Patange, MP Khond, HJ Rathod, KB Chhadva. Investigation of Foundry Waste Sand Reclamation Process for Small And Medium Scale Indian Foundry, International Journal of Industrial Engineering and Technology (IJIET), Mar 2013; 3(1): 1–6.

Aniruddha Ghosh, Modern Sand Reclamation Technologies for Economy, Environment Friendliness and Energy Efficiency, Transactions Of 61st Indian Foundry Congress 2013.

Dushyant R Bhimani, Jayeshkumar Pitroda, Jaydevbhai J Bhavsar. A Study on Foundry Sand: Opportunities for Sustainable and Economical Concrete, Jan 2013; 2(1).

Pathariya Saraswati, Rana Jaykrushna, Shah Palas, Mehta Jay, Patel Ankit. Application of Waste Foundry Sand for Evolution of Low-Cost Concrete, International Journal of Engineering Trends and Technology (IJETT)– Oct 2013; 4(10).

Jozef Danko, Rafal Danko. Mechanical Reclamation Treatment of Used Silica Foundry Sand at Extra-low and Ambient Temperatures, Materials Science (Medžiagotyra). 2005; 11(4).

Saveria Monosi, Daniela Sani and Francesca Tittarelli, Used Foundry Sand in Cement Mortars and Concrete Production, The Open Waste Management Journal, 2010; 3: 18–25.

A Naveen Arasu, S Vivek, J Robinson, T Thilak Ranjith. Experimental analysis of waste foundry sand in partial replacement of fine aggregate in concrete, International Journal of Chem Tech Research Coden (USA): IJCRGG, 2017; 10(8): 605–622.

Maria Mavroulidou, David Lawrence, Can waste foundry sand fully replace structural concrete sand? Journal of Material Cycles and Waste Management 2019; 21: 594–605.

Downloads

Published

2020-02-29

Issue

Vol. 5 No. 2 (2019)

Section

Articles